The wet pan mill gravity solution is very popular in many African countries like Zimbabwe,Egypt and Sudan，The working procedures is crushing→grinding→knelson centrifugal concentrator selection（to get the big size free gold）→shaking table(to select the fine gold from the ore tailling).Firstly put the stone into the jaw crusher, the usual crusher model is PE250x400,whose capacity is 10 to 20 ton per hour. After crushing, the stone is broken into particles less than 20mm. The the particles are put into the gold wet pan mill, and they are ground into powder about 100 to 150 mesh( from 80 to 150 micron). Then the slurry formed in the wet pan mill is transferred to the gold centrifugal concentrator, in which some gold concentrate black sand are collected. Then the tailing goes to the shaking table for further recovery of the remaining gold.
The gold gravity equipment will be loaded into 20ft or 40ft container according to the space and weight. Until now, we have sent the gravity equipment to many countries, including Sudan, Zimbabwe,Mauritania and Egypt.